Performing A Notebook Memory Upgrade
This article can be really useful to you if you are interested in notebook memory upgrade. It will outline to you all the details needed to carry out the operation successfully. The software applications these days are getting really demanding when it comes to hardware. For example, the Aero package of the New Windows vista requires 1GB of RAM memory, while most laptops are armed with just 512MB. But the thing is that upgrading the RAM memory of your laptop is something that's always worth doing, because it will significantly improve the overall performance. So you should do it even if your current configuration is well capable of running the applications you are using everyday. Most of us, while using the laptop or a desktop, like to open a lot of different windows at once, multitasking, that's cool right?! Well, it is but it requires a lot of RAM.
First thing about notebook memory upgrade is to understand what type of RAM it supports. Check the manual to find out. In the manual, you should be able to find out the maximum memory capacity of your laptop is. In the Windows System Information menu, check out how much RAM you currently have. From the manual, read how much RAM you can add in each slot and what exact type it should be - SDRAM, RDRAM, DDR. For example, the motherboard of your notebook could support 2 memory modules, 1GB each, at 833MHz. Make sure both modules work at the same frequency (RAM speed - in this case 833MHz, this is the speed at which the CPU can read data contained in the RAM), otherwise the motherboard will automatically switch to the lower frequency.
Once you are aware of exactly what type of RAM you need and how much, the next step is to actually install the module(s). Start by arming yourself with a screwdriver, and opening up the cover of the RAM compartment. It should be on the underside. Of course, the laptop should be turned off, but that's common sense. There is usually a computer chip that indicates the panel that covers the RAM memory slots. This should also be mentioned somewhere in the manual. Also have in mind that your static electricity can literally kill computer parts so make sure you touch something made out of metal like a table leg for example, in order to ground yourself.
If you are upgrading an existing module, then obviously you would have to remove it first, by pressing the clips on both sides simultaneously which will eject the RAM module. But because unlike on regular desktops, in the case of notebooks, the RAM memory is positioned horizontally, laying down, so you will have to grab the module by the edges and slide out at a 45 degree angle. Put it in an anti-static bag (you can use the one that contains the new module). In the exact opposite way you have to put the new module - sliding it back again at 45 degrees. You will know if you have done it right if the clips click into place. There is a software notebook memory booster available online. It's really important to perform a laptop memory upgrade. My advice is that if you have a notebook add ram. Laptop ram upgrade is the easiest types of upgrades to make and yet it has so obvious results. That's why you should buy laptop memory. If you have a lap top, you need ram laptop. Use google to find notebook ram online. There will always be a need for more memory notebook ram so you should perform a laptop ddr upgrade, if your laptop supports DDR laptop ram. The Internet is the best place to find laptop ram memory, just type in Google 'memory ram laptop'.
Privacy Policy >> Legal Disclaimer >> Contact
|
